Heat-cured-composite panel-edge finish material
Honeycomb structural panels are currently widely used in a variety of industries, such as aerospace and building construction, for their light weight and rigidity. While panel surfaces typically require no protection, edges are often a problem because the internal structure is exposed. The L-9000 series heat-cured composite materials save time and labor over traditional two-part paste-type applications for honeycomb-panel edges. Being a pliable tape, L-9000 can be applied quickly and easily to composite honeycomb panels. Oven curing this product at a range of 250 to 275 F provides a volume expansion from 100 to 400 percent. This versatility allows for filling gaps and providing an edge that can machined to optimal fit and finish specifications. The predictable post-cure density provides uniform material specifications in finished panels and can be saw cut, laser cut, milled, sanded, or lathed to meet demanding fit and finish requirements.
Epoxy resin, blowing agent
Honeycomb-panel edge finishing
Wide variety of strip widths
Eliminates waste and cleanup typical of two-part liquid and paste materials, cured product gives off no volatile organic compounds
Burn AITM 2.0002A, Smoke Density FAR 25.853(D) & ASTM F 814(FM), Toxicity AITM 3.0005/ABD 0031/FMO, Tube shear strength DIN EN 2667-2
End-use product temperature should not exceed 176∞F (80∞C)
LL Products
