Soundproof Window

Extremely noisy environments near airports, roads, or loud entertainment centers pose acoustic challenges for building occupants, and typical windows cannot provide adequate protection against certain types of noise pollution. A double or triple layer of glass will absorb the high frequencies, but can do nothing against low-frequency noise such as that produced by aircraft or the bass tones of loud music.

Researchers at the Fraunhofer Institute for Structural Durability and System Reliability LBF and Darmstadt University of Technology have recently developed a new type of soundproof window. “Tests have shown that our windows are capable of lowering noise levels by an average of six decibels at frequencies between 50 and 1000 hertz. The perceived noise indoors is only half as loud,” says Dr. Thilo Bein, who manages the institute’s department of energy, environment and health. “We have even been able to reduce the volume of certain test signals by up to 15 decibels.” The experts have predicted a reduction of up to 10 dB for the engine noise of passenger aircraft in the frequency range below 1000 Hz.

When noise waves meet the walls of a building, they can be propagated to the interior by various routes. One is by causing the windows to vibrate, thus carrying the noise into the building. The other is by transmitting sound waves to the interior via the bridges in the structure where the curtain-wall elements are attached to the frame of the building. In both cases, the researchers have found a way to prevent the propagation of sound energy. Acceleration sensors attached to the window panes measure the vibrations generated by the noise. A thin chip of piezoelectric material also attached to the window counteracts the vibration by generating an oscillation at the same pitch but in the opposite sense to that measured by the sensor – causing the pane to move in the opposing direction. “We have devised a similar solution for the points where the outer cladding is attached to the frame of the building. In this case, a stack of piezoelectric chips, rather than a single piezoelectric strip, counteracts the impinging force,” says Bein.

The researchers presented a prototype of the new soundproof window at the Hannover Fair in April. According to Bein’s estimations, the new active noise-reducing windows could be on the market in about four years’ time.

Contact: The Fraunhofer Institute, Munich, Germany.